Just used my last Buck 110 blade on an old & worn Buck 560 from a friend of mine.
Had to use the old backspring as i'm all out of new ones, but luckily i still had a new blade, a pivot pin, and a bronze bushing.
The new pivot pin wasn't riveted with a hammer, but pressed using a vise and a little home made tool.
Pressing lessens the chances of damaging the handle plus it allows for a more precise tightening of the pivot, in this case to a 99.99 % bladeplay-free action.
Buk 560 reblade
- Peerke
- Posts: 4059
- Joined: Thu Oct 15, 2015 7:05 pm
- Location: West Brabant
- Has thanked: 22 times
- Been thanked: 103 times
Re: Buk 560 reblade
Daar heb ik goede herinneringen aan. Dat was mijn eerste echte zakmes. Tot 2x toe het lemmet afgeslepen.
Het blijft een icoon van een zakmes. Niet zo lang geleden had ik overwogen om de 'plastic' uitvoering ervan bij Kato aan te schaffen, maar heb het maar niet gedaan
Het blijft een icoon van een zakmes. Niet zo lang geleden had ik overwogen om de 'plastic' uitvoering ervan bij Kato aan te schaffen, maar heb het maar niet gedaan
Lies live on, and the truth is the victim.
- Peerke
- Posts: 4059
- Joined: Thu Oct 15, 2015 7:05 pm
- Location: West Brabant
- Has thanked: 22 times
- Been thanked: 103 times
DC53. New kid ?
https://titussteel.com/our-products/mol ... -53-steel/
Geen idee wat ik ervan moet denken
@kwakster
Iets tussen D2 en Elmax in ? of tussen BG42 en magnacut . Als het zo high end is voor een crappy price.
You know, I know...
Geen idee wat ik ervan moet denken
@kwakster
Iets tussen D2 en Elmax in ? of tussen BG42 en magnacut . Als het zo high end is voor een crappy price.
You know, I know...
Lies live on, and the truth is the victim.